How much does a pool pump replacement cost?
Angi, a home services marketplace, reports a national average of $1,300 for pool pump replacement. Its page, updated September 16, 2026, shows a normal range of $700 to $4,000. Angi’s low end is $160 and its high end is $6,000.
These are national figures. They are not DFW prices, and they are not Marina Pool Services prices. Marina does not publish prices. It quotes each job, because the pump, the pad and the wiring differ from one pool to the next.
What does each pump type cost?
Angi lists average cost ranges in 2026 by pump type. The table repeats Angi’s figures, which cover the pump itself.
| Pump type | Angi’s range | Angi’s note |
|---|---|---|
| Low-head | $250 to $1,600 | Pools with water features that need a secondary pump |
| Medium-head | $400 to $2,500 | Standard-sized swimming pools |
| Single-speed | $250 to $1,000 | Listed for pools with water features that need a secondary pump |
| Dual-speed | $300 to $1,600 | Two settings for a standard pool |
| Variable-speed | $800 to $2,500 | Fully adjustable speed to maximize energy efficiency |
Source: Angi, updated September 16, 2026. See the pool pump buyer’s guide for how the types differ. A variable-speed pump can change its speed. A single-speed pump has one setting. A two-speed pump has two.
How big a pump do I need?
Size drives the price. Angi says smaller pools up to 10,000 gallons need only 0.5 horsepower and cost $160 to $250. It says pools in the 20,000 to 30,000-gallon range need 1.5 horsepower and cost $200 to $3,300. A bigger pump is not always better. The pump has to match the plumbing, the filter and your equipment.
What does labor add?
Angi gives these labor figures:
- Replacing an old pump with the same brand, horsepower and type: $200.
- A different brand with rewiring or new pipes: $280 to $500.
- A professional installing a new pump: $200 to $500 for labor.
A same-for-same swap is the simplest job. A new brand or type can mean new fittings, plumbing changes or electrical work. Pump wiring is electrical work. Texas requires a license for electrical work, so ask your installer who does that part. We do not give wiring steps.
Is it cheaper to repair the pump?
Sometimes. Angi says minor problems, such as a clogged impeller or small leaks, can often be fixed for less. It lists replacing a pump bearing at $65 to $300. It lists a new pump motor at $250 to $2,000.
Angi’s rule: “if repair costs exceed 50% of the price of a new pump, replacement is the smarter financial decision.” It also names three signs that favor replacing:
- Significant motor or housing damage.
- Recurring problems after a prior repair.
- A motor that costs as much as $2,000 to replace.
Common wear parts include motor bearings, the shaft seal and the lid o-ring. A loud pump or a leak at the seal is often a repair question. See our pool pump repair service for what a diagnosis covers.
What else changes the price?
- Pump type and horsepower. Variable-speed costs more up front.
- Brand. Angi lists “brand selection” as a driver.
- Pool size. Larger pools need more flow.
- Plumbing and electrical. A different brand can mean new pipes or rewiring.
- Control setup. Angi notes that a full control system upgrade or complex retrofit adds cost.
- Local labor rates and permits. City rules differ across Tarrant County.
How do I compare two pump quotes?
Ask each company the same five questions.
- What exact pump brand, model and horsepower is quoted?
- Does the price include labor, fittings and wiring work?
- Who does the electrical connection?
- Does the quote cover removal of the old pump?
- What does the company say it covers if the new pump fails? Get it in writing.
A lower price may leave out parts. Compare line by line. Our pool service cost guide explains how to read quotes, and our pool equipment lifespan guide helps judge whether an older pump is worth saving.
How can I tell my pump is on its way out?
Look for these signs:
| Sign | What it can mean |
|---|---|
| Loud grinding or screaming | Worn bearings |
| Humming but not turning | A motor or capacitor problem |
| Leak under the pump | A failed shaft seal or housing crack |
| Losing prime | Air leak in the suction side |
| Trips the breaker | An electrical fault; call a pro |
These are common causes, not a diagnosis. A technician needs to look at the pump.
What should I do before I buy a pump?
Treat any online range as a starting point. Angi builds its numbers from national data, and DFW labor rates, brands and pool sizes differ. Do these steps before you decide.
- Write down your current pump brand, model and horsepower from the label.
- Note the age of the pump and what has failed.
- Ask for a written quote that names the exact pump model.
- Ask what the quote includes for fittings, wiring and removal.
- Compare at least two quotes line by line.
A quote that matches your existing plumbing and equipment is often simpler than a bigger change. Ask the installer to explain why a given pump suits your pool.
Next step
If you want a number for your own pool, see the pool pump repair page, then call Marina Pool Services at (817) 896-1120 or use the quote form at /contact. Marina gives free estimates for qualifying services.
Frequently asked questions
How much does it cost to replace a pool pump?
Angi reports a national average of $1,300 and a normal range of $700 to $4,000, on a page updated September 16, 2026. That is a national figure, not a DFW price. Marina Pool Services does not publish prices and quotes each job.
Is a variable-speed pump worth the higher price?
Angi lists variable-speed pumps at $800 to $2,500, above single-speed at $250 to $1,000. The higher price buys speed control and lower energy use. Whether it pays back depends on your run hours and electric rate, so ask for a quote and do the math.
Should I repair or replace my pool pump?
Angi says that if repair costs exceed 50 percent of the price of a new pump, replacement is the smarter financial decision. It also lists significant motor or housing damage and repeat problems after a past repair as signs to replace.
Does Marina Pool Services publish pump prices?
No. Marina does not publish prices. It gives free estimates for qualifying services and can give same-day estimates when scheduling allows. Call (817) 896-1120 or use the contact form.
Pool terms on this page
Sources
Written by Marina Pool Services and checked against the sources above on October 21, 2026. City rules and product guidance change, so check the linked page before you act. Follow product labels for any pool chemical.
